Any Carburetor Parts Companies??

RTR

Well-known Member
Are there any companies out there that specialize in Carburetor parts and rebuild kits?

I know of Denny's Carb Shop, but I thought there was another one that had more parts. I know Brillman is somewhat of a specialty company but they mainly do the electric side with some carburetor stuff.
 
carb off what ? NAPA , BUMPER TO BUMPER , THE DEALER, is some starting places. if its a carb off jay leno's duezenburg then you might have
fun hunting.
 
(quoted from post at 01:52:06 08/02/22) McDonald Carb, this is where most other people selling carb parts get their parts.

That is who I was thinking of. I couldn't remember who it was. Thank you.
 
(quoted from post at 01:57:31 08/02/22) carb off what ? NAPA , BUMPER TO BUMPER , THE DEALER, is some starting places. if its a carb off jay leno's duezenburg then you might have
fun hunting.

Right now, I'm working on a Ford 3000 gas with a Holley Carburetor, a Ford 8n with a Marvel carb, an Allis D-17 with a Marvel carb, and a Farmall 140 with an Aluminum body Zenith Carb. I also have an extra Marvel Carb that I THINK came off a 600 series Ford, but not sure what It is off of.
 
Forget Dennys, he does not have a very good reputation localy. I have met him several years ago. Was speaker at tractor club and was just glad to get away as he was getting pounded from all ways. Couple of years later think it was anouther club had got him for speaker, As soon as he figured out the group that would be there hr cansled speaking. The locals will not go to him. Only out of area that don't know him for his bussiness. I was there when he ran away just hoping he would not get beat up.
 
Had very go luck with Mikes carburetor . Very extensive listings very knowledgeable staff

McDonald very knowledgeable and helpful .



And check the yesterdays parts ,also



So we just need a little more information what your working for more help , ? Please share ?
 
Chunk the Holley while you still have some sanity left!

Replace it with the alternative for that tractor, I think Zenith.

Rebuilt factory is better than aluminum aftermarket.
 
Beat up? You're exaggerating I'm sure Leroy. If not, your tractor club doesn't sound like a friendly bunch.
 
I don't remember full details But If I rember he ripped off several club members I just remember there was problems with his work.
 
FYI.
Yesterday Tractors sell carbs.
Have you checked them out for parts?
Sometimes I buy new carbs instead of fighting old ones.
 
(quoted from post at 13:57:31 08/01/22) carb off what ? NAPA , BUMPER TO BUMPER , THE DEALER, is some starting places. if its a carb off jay leno's duezenburg then you might have
fun hunting.

Carb off whatever. The OP appears to be looking for a "one stop shop" or a "go-to" place for any carburetor need they might have.
 
Mikes Carburetor Parts. They got me a carb repair kit for the Holley teapot carb on the 52 Mercury and have many others. A youtube channel as well.
https://www.carburetor-parts.com/bbd-carburetor-parts
Mikes Carbs
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top