jacksonduper
Member
I need a new radiator for a IH 966. Any leads on where to get one for a reasonable price? Online?
Joe
Joe
- Thread starter jacksonduper
- Start date
fixerupper
Well-known Member
Like Delta said a radiator shop is a better place to go. If a radiator shop is many miles away and you are forced to order online pay attention to the shipping weight. The heavier the shipping weight the better chamce you will have in getting a good durable radiator.
BarnyardEngineering
Well-known Member
- Location
- Rochester, NY
Abeline Machine shows a new radiator for $550, first result on google.
I bought an ebay radiator for the 856. It fit back in better than the supposedly "top of the line" Clancy we took out.
I bought an ebay radiator for the 856. It fit back in better than the supposedly "top of the line" Clancy we took out.
caterpillar guy
Well-known Member
I got a new radiator for the semi from a place near Detriot a couple years ago was a decent radiator. Did have a problem with the ears that bolt to the side for mounting. When I called I was told a BS line about the original blue prints have one set up, and a different one is what comes out when the pieces are made. I guess they are one of those places that has one pantleg shorter then the other then claims it is the same measurement after you adjust for metric or something.
Heavy Duty version of 121725C1, but with one more row of tubes.
OVERALL HEIGHT: 30
OVERALL WIDTH: 23 3/8
CORE HEIGHT: 24
CORE WIDTH: 22 1/2
DEPTH: 3 7/8
ROWS: 6
FINS PER INCH: 8
FILL NECK HEIGHT: 4 1/2
INLET: 2
OUTLET: 2 1/2
Replaces 71611C1, 121725C1, 121723C1, 533586R2, 71610C1
Elmer's Repair in Centralia KS
https://www.elmersrepair.com/er-71611c1
Just bought a drawbar from them this morning.
OVERALL HEIGHT: 30
OVERALL WIDTH: 23 3/8
CORE HEIGHT: 24
CORE WIDTH: 22 1/2
DEPTH: 3 7/8
ROWS: 6
FINS PER INCH: 8
FILL NECK HEIGHT: 4 1/2
INLET: 2
OUTLET: 2 1/2
Replaces 71611C1, 121725C1, 121723C1, 533586R2, 71610C1
Elmer's Repair in Centralia KS
https://www.elmersrepair.com/er-71611c1
Just bought a drawbar from them this morning.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy