Trailer Lights Update

super99 · Jun 7, 2022

I go them working today!! All who said ground were correct. I started at the plug on the truck, took ground loose, shined it up, cut off the eye and soldered on a new one with heat shrink tape on it. Then did the same at the junction box on the trailer, still no brake or turn signal. I took both lights out on the left side and saw a ground inside, so I took it off and shined it up and replaced the eye and soldered it on. Tried the lights and all work now. Thanks for the help!!! Chris

Kansas4010 · Jun 8, 2022

Bad grounds cause all kinds of funny problems. I had a trailer when I use the turn signals the running lights would blink with them. With help from here I checked the grounds and all fixed.

504 · Jun 8, 2022

I had a car that the right turn signal would work and the left one would not. It turned out to be a bad ground on the right side! I spent three hours chasing that thing

Trailer Lights Update

super99

Well-known Member

Kansas4010

Well-known Member

504

Well-known Member

Similar threads