About all I use my Dodge for is hauling my tractor. It's a V10 and does a good job, and likes gas. I unloaded it yesterday on a slight down hill street. The tractor pushes the truck which was in park while unloading. I loaded the tractor after finishing my mowing job. I go to start it, and the key doesn't turn, stuck in the off position. I had no idea what to do. I unloaded the tractor and pulled the trailer back a few inches. Doing this somehow it loosened the key switch, and I could start the motor. My question. Is the key switch somehow connected to the park position? Had this not worked I had no idea what to do next. I was blocking half of the lane at the time. It was not a busy street, which was good. Any thoughts? Stan