backhoe rubber bumper stops

ghunziker · Apr 5, 2022

I have a small utility tractor(Century 2535) with a backhoe(C-System 50). I need to replace the rubber bumper stops that keeps the arm from swinging to far. Can someone tell me where I can find them. Local dealers no help. Any help would be appreciated.

wore out · Apr 5, 2022

(quoted from post at 17:40:08 04/05/22) I have a small utility tractor(Century 2535) with a backhoe(C-System 50). I need to replace the rubber bumper stops that keeps the arm from swinging to far. Can someone tell me where I can find them. Local dealers no help. Any help would be appreciated.

If no help from the maker or it's successors take a look at the McMaster site linked below, they have a WIDE variety of rubber bumpers.

https://www.mcmaster.com/rubber-bumpers/

Or, check with a TYM dealer or look at their parts catalogs online to see if they use anything similar on their 'hoes.

As a side note, a friend of mine had an old Ford Major/Sherman backhoe for many years and I recall noticing he made swing "bumpers" from sections cut from a tire.

This post was edited by wore out on 04/06/2022 at 07:38 am.

Hdonly · Apr 6, 2022

Might try something like these. Fairly cheap if they don't work.

DoubleO7 · Apr 6, 2022

I don't think McMaster Carr is a Grainger company.
But they have the same stuff I bet.

wore out · Apr 6, 2022

(quoted from post at 06:46:10 04/06/22) I don't think McMaster Carr is a Grainger company.
But they have the same stuff I bet.

Fixed it!

Thanks for bringing that to my attention!

backhoe rubber bumper stops

ghunziker

Member

wore out

Well-known Member

Hdonly

Member

DoubleO7

Well-known Member

wore out

Well-known Member

Similar threads