1939farmall
Member
We ended up with a little over a foot of snow from the storm this week. Not unheard of around here, but not a common occurrence either. I had the Case 830 you guys helped me tune up parked in front of the shop ready to go.
I think it did a good job opening the driveway up. It ran great!
Its a nice sunny day so I decided to spend some time in the shop. I brought the car up and parked it before the storm hit since it wont get much use till we get a melt! It needs a bath but Ill wait on that for awhile.
Some of you might remember when me and son got the auction M going I was having trouble with the starter. I tried to solder it but I really couldnt control the heat and didnt do a very good job. It lasted for a bit but I let the smoke out of it the other day. I order a new one from this site and put it on. Now it cranks like it should!
My grandfathers old section of harrow finally broke so I decided to try to fix it up a bit.
My dad was my go to guy for welding. Now that hes gone Im bound and determined to become a competent welder! I figured this would be a good piece to practice on. I welded the front up and then used an old bolt in the back and welded it in to reinforce the weld. Well see if it holds! I too embarrassed by my welding ability at this point to show a close up, but Im learning! As I look around the shop I realize how many things you all have helped me with! I like to thank you and tell you all I appreciate it! Thank for spending some time in the shop with us!
I think it did a good job opening the driveway up. It ran great!
Its a nice sunny day so I decided to spend some time in the shop. I brought the car up and parked it before the storm hit since it wont get much use till we get a melt! It needs a bath but Ill wait on that for awhile.
Some of you might remember when me and son got the auction M going I was having trouble with the starter. I tried to solder it but I really couldnt control the heat and didnt do a very good job. It lasted for a bit but I let the smoke out of it the other day. I order a new one from this site and put it on. Now it cranks like it should!
My grandfathers old section of harrow finally broke so I decided to try to fix it up a bit.
My dad was my go to guy for welding. Now that hes gone Im bound and determined to become a competent welder! I figured this would be a good piece to practice on. I welded the front up and then used an old bolt in the back and welded it in to reinforce the weld. Well see if it holds! I too embarrassed by my welding ability at this point to show a close up, but Im learning! As I look around the shop I realize how many things you all have helped me with! I like to thank you and tell you all I appreciate it! Thank for spending some time in the shop with us!