2022.01.27 Rust Pic

kcm.MN

Well-known Member
Location
NW Minnesota
Puzzle: https://jigex.com/XP8T7

mvphoto87425.jpg
 
Majorman, That's an unusual placement of the lifting cylinder on that loader. Do you know any history on that?
 
One tough tractor, dad used a pair in the woods to skid. After they purchased the C4 Tree Farmer one came home to the farm. I spent a lot of hours with a 10 foot john Deere KBA. I will always remember one night in June I was disking rented corn ground about 6 miles from home, as it got dark I started hoping they had not forgot me. Soon grandmother came she had two sandwiches some water and five gallons of diesel.
 
The cylinder position was a pretty common one here in England, My Midland Industries Loader (MIL) has rams that push up. Do not know the reason but they do push on the strongest part of the tractor, the rear axle so that could be the reason.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top