1937 D model tool box placement

kgrosslight

New User
Hi, just finishing up a model restoration but I have no idea where to put or how to fasten the small tool box that is usually with the tractor. Description would be helpful, photos would be great.
Thanks for helping.
Ken
 
On my 29 D, it bolts to the crankcase cover bolts, on my 38 D it bolts to the inside of the right fender. Sorry no pictures at this time. You might look at www.jdparts.com for the free online parts book and see if that gives you a better location.
 
(quoted from post at 15:35:03 12/19/21) On my 29 D, it bolts to the crankcase cover bolts, on my 38 D it bolts to the inside of the right fender. Sorry no pictures at this time. You might look at www.jdparts.com for the free online parts book and see if that gives you a better location.

Thanks Mark, there is a ridge between the fender and the case and this prevents the box from mounting flush on the fender. That is why I am somewhat confused.

Ken
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top