What's it fit

redtom · Dec 14, 2021

Found in my shed during cleaning. What's it most likely fit?

AU2001 · Dec 14, 2021

With it having the toolbox under the seat, it looks like it is for a Farmall H or an M to me.

diesel fumes · Dec 14, 2021

original to early farmall h.

JMOR · Dec 14, 2021

A bottom?

kris Jensen · Dec 14, 2021

Hello. It fits early Farmall H or M,
also W4, W6

redforlife · Dec 14, 2021

It's a seat for a farmall tractor. Looks like it has been torched off, instead of un-bolted. Possibly from an H or M (they had the same seat I think). Where its torched off, there was a square piece with flat iron and holes for bolts to be mounted to platform. If I'm wrong, it could of possibly fit one of the other letter series. I'm not familiar with those, or how they bolted on. Either way, that part is gone.
For what its worth, don't scrap. The springs notoriously broke, and the pan often rusted out. This one looks like a good one, other than part of its been torched off.

G Miller · Dec 14, 2021

This was given to me years ago when a friend of mine sold his MC crawler.I dont know what it fits but I thought it had to do with the belt pulley M826T

jal-SD · Dec 14, 2021

Definitely for a Farmall. Is the tube round or rectangular? If round, something from probably an H or M built between 1940 & late 40's. If it's rectangular, it's a relatively rare seat from a '39 or early '40. It is missing the mounting bracket. Could be from a W series, too. I'm not familiar with mounts for that series.

redtom · Dec 14, 2021

No torch marks. Tube is clean and round. I have a W6 but my tube goes back farther

super99 · Dec 14, 2021

Neighbor had a 1939 M with that seat.

504 · Dec 14, 2021

looks like brakes or steering clutch

paul · Dec 14, 2021

Looks like my H seat. I would think a M of the same era would be the same.

Paul

rustred · Dec 14, 2021

its only farmall , dont get McCormick involved . w4 or w6 has no such seat.

redforlife · Dec 15, 2021

From the picture, the pipe end doesn't appear to be square. Like it is cut off at an angle. Anyways, it also looks like a piece is gone. Possibly held on by the pin close to the end. If not gas axed, something sure looks to be gone/missing.

What's it fit

redtom

Well-known Member

AU2001

Member

diesel fumes

Member

JMOR

Well-known Member

kris Jensen

Member

redforlife

Well-known Member

G Miller

New User

jal-SD

Well-known Member

redtom

Well-known Member

super99

Well-known Member

504

Well-known Member

paul

Well-known Member

rustred

Well-known Member

redforlife

Well-known Member

Similar threads