Kid Shileen
Member
I bought an oil filter for my Ford 1210. However its smaller than the filter that is on the tractor. The one on the tractor is part number 8656623. The new one is 86546623. Will the new one work?
- Thread starter Kid Shileen
- Start date
Steve@Advance
Well-known Member
Do some research online.
See what is called for across several brands. There are internal differences in filters. Even though it may screw on and not leak, there can be differences in the drain back valve, the bypass spring, the micron rating.
In my opinion, bigger is better, but the manufacturers don't always tell you that.
See what is called for across several brands. There are internal differences in filters. Even though it may screw on and not leak, there can be differences in the drain back valve, the bypass spring, the micron rating.
In my opinion, bigger is better, but the manufacturers don't always tell you that.
Gambles
Well-known Member
Running both of those numbers in the Fram cross-reference sections gets nothing, but I do have an old NAPA paper filter book.
Is this Ford 1210 a 16 hp diesel unit built from 1983-1986? NAPA book shows a 1396 lube, 3264 fuel and a 6270 air.
Probably not what you are looking for, but someplace to go if you are still uncertain about your current filters.
Is this Ford 1210 a 16 hp diesel unit built from 1983-1986? NAPA book shows a 1396 lube, 3264 fuel and a 6270 air.
Probably not what you are looking for, but someplace to go if you are still uncertain about your current filters.
redforlife
Well-known Member
Same number with extra digit, and one other digit just one number off?? My first guess is, the wrong one may have been grabbed off the shelf. I'd take new one back, along with the number of old one. Inquire about it where you bought it at. If wrong, you'll want to return the new one anyways, and get the right one.
I got to watch the counter guys at my local parts store. They frequently make mistakes. I like to catch thier mistakes at the stote if I can, so I don't have to return. I frequently take old parts with me, so I can compare to thier new ones, right there in the store. Saves me the arguing part too.
I got to watch the counter guys at my local parts store. They frequently make mistakes. I like to catch thier mistakes at the stote if I can, so I don't have to return. I frequently take old parts with me, so I can compare to thier new ones, right there in the store. Saves me the arguing part too.
Wisconsin Cowman
Member
8656623 Is to short of a part number for CHN your missing the 4. CNH probably switched suppliers over the years for that filter. 86546623 subs to part number 47427154. If you got the filter from a New Holland dealer I would say your ok.
dcarp
Well-known Member
- Location
- Schulenburg Texas
Times 2 on the CNH 47427154, which is the correct filter.
Carlmac 369
Member
The Wix lookup site says it will.
https://www.wixfilters.com/Lookup/InterchangeMultiSearch.aspx?q= 86546623&o=me
https://www.wixfilters.com/Lookup/LUQuickSearch.aspx
The first number you posted doesn't show up on the Wix site.
This post was edited by Carlmac 369 on 11/27/2021 at 06:15 am.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy