Farmall H parts inquiry

Nemesismotors13 · Nov 19, 2021

Hey guys and gals,
So I have an early 1940s farmall H I am looking for a handful of things for. For starters I am looking for the hydraulic belly pump, not the steel wheel but the clamp on 3 bolt rims and the hub for them, draw bar, and battery box. If you know of a place or person that's looking to part ways let me know because I could use them. The factory down bolster is on it currently but some time way back when the hubs were switched to what appears to be a ford 5 lug hub.

el6147 · Nov 19, 2021

knowing your location would be beneficial.

I have a couple of Hs for parts, southwest Mich.

email is open

Goose · Nov 19, 2021

If you're anywhere near, Northeast Tractor Parts in Lyons, Nebraska has a lot of old Farmalls.

Ellis Kinney · Nov 19, 2021

Bates Corp. Bourbon Indiana is probably the best IH only source in the U.S. Ellis

DeltaRed · Nov 19, 2021

IH made almost 400,000 H tractors.They are everywhere.I'll bet there is at least one junk H in your neighborhod.

redforlife · Nov 19, 2021

These can be easily found, unless you don't live in north america. If you do, you should be able to find them close to where you live, pick them up yourself, avoid shipping/frieght costs. The shipping cist probably be more than what these items will cost you themselves.
Look in salvage yards, or give us a general area as to where you live, so we can post salvage yard info thats not 1,500 miles away from you.

old · Nov 19, 2021

A lot depends on where you are and if your willing to pay shipping etc. I have a parts H here in Missouri

Nemesismotors13 · Nov 19, 2021

The salvage yards around me either crushed what they had, they are so picked over or they want an arm and a leg for them.

Nemesismotors13 · Nov 19, 2021

Awesome thank you!!!

Nemesismotors13 · Nov 19, 2021

I am in central VA but a road trip sounds really nice right about now.

old · Nov 19, 2021

I've been trying to sell 4 Farmall Hs for years now as a package deal. You get all 4 for $2000 and 3 ran when parked and I know for sure 2 would still run and the 3rd needs a distributor

Nemesismotors13 · Nov 19, 2021

I found a few in my area at a scrap yard and a couple of private sales the one guy wanted 2300 for his no Rims no bolster basically just a junk motor and a possibly good rear.i have looked a little but not too much.

NY 986 · Nov 19, 2021

You would be surprised how much junk got cleaned up in the last several years. Around here parts tractors are not on every rural road anymore. If in not in any hurry I would watch Craigslist. If time is crucial around here I would call Wenger's in PA even though it is around 200 miles away. Bates would be another but then freight gets to be more of an issue.

Drew · Nov 19, 2021

That all sounds like stuff someone would remove or replace when building a pulling tractor. Shouldn't be too hard to find. Check on tractor pulling pages, someone probably has that stuff laying around they want rid of.

caterpillar guy · Nov 20, 2021

J.P. tractor salvage in Fredricktown MO Harvey gross in MI or look around your area for them. H's should be laying all over with the number built.

Farmall H parts inquiry

Nemesismotors13

New User

el6147

Member

Goose

Well-known Member

Ellis Kinney

Well-known Member

DeltaRed

Well-known Member

redforlife

Well-known Member

old

Well-known Member

Nemesismotors13

New User

Nemesismotors13

New User

Nemesismotors13

New User

old

Well-known Member

Nemesismotors13

New User

NY 986

Well-known Member

Drew

Well-known Member

caterpillar guy

Well-known Member

Similar threads