123ignitionusa
New User
Hello
I have a 2003 HR16 by Terex, Schaeff and supported by Yanmar via Vermeer All Roads. Parts are readily available but trying to track down an operators manual. Really just interested in wether or not this has a float mode for the dozer blade. Also looking for used ditching bucket if anyone has one let me know. I have the Terex quick connect.
I did notice before I put it up for pin replacement that when crowding in the boom it would loose power. I would repeat the motion and it would be better. Any ideas? I plan on draining the fluid and replacing the filters in case the previous owner neglected it.
Thanks for taking the time to read this.
Ed
This post was edited by 123ignitionusa on 11/18/2021 at 11:46 am.
I have a 2003 HR16 by Terex, Schaeff and supported by Yanmar via Vermeer All Roads. Parts are readily available but trying to track down an operators manual. Really just interested in wether or not this has a float mode for the dozer blade. Also looking for used ditching bucket if anyone has one let me know. I have the Terex quick connect.
I did notice before I put it up for pin replacement that when crowding in the boom it would loose power. I would repeat the motion and it would be better. Any ideas? I plan on draining the fluid and replacing the filters in case the previous owner neglected it.
Thanks for taking the time to read this.
Ed
This post was edited by 123ignitionusa on 11/18/2021 at 11:46 am.