stripped rear lug nuts on my 9N

Ron Tron · Oct 5, 2021

been surfing the net and yesterdays tractor for hours to replace a couple rear lug nuts on my 9N that are stripped with no luck. Anyone know where I can find what I believe are 5/8 x 18 or 20 thread bolts

grayrider · Oct 5, 2021

You can get them on eBay

Dave BN · Oct 5, 2021

Try a race shop if you have one near you. I work at Port City Racing in
Coopersville, Mi. You can try them too. We ship world wide.
Dave.

warbaby · Oct 5, 2021

.
rear stud

JMOR · Oct 5, 2021

(quoted from post at 17:42:20 10/05/21) been surfing the net and yesterdays tractor for hours to replace a couple rear lug nuts on my 9N that are stripped with no luck. Anyone know where I can find what I believe are 5/8 x 18 or 20 thread bolts

T has bolts and lug nuts, but I am not sure if all 9N/2N wheel/axle configurations use same. Used search tool on yt parts for "lug nuts"

Royse · Oct 5, 2021

Which is stripped? Nuts or the studs?
Nuts are easy to replace. Studs, not as easy.

CKain(MI) · Oct 5, 2021

HOw long ? maybe the same as a TO20 Fergie ?? I have a couple extras, new.

Ron Tron · Oct 8, 2021

(quoted from post at 14:47:11 10/05/21) You can get them on eBay

Looked on Ebay. Didn't see them. Could you send me a link?

OldTractorNoob · Oct 8, 2021

They're not all the same. The studs for the original hubs had sort of a round head with a side cut off that fit in against the hub so it doesn't spin. There was a replacement hub at some point that used studs with sort of a taper and ribs or something that would catch and keep the stud from spinning. They're not interchangeable.

On the other hand, if you're talking about going from the center to the rim, it's just a regular carriage bolt, if I'm remembering correctly.

JMOR · Oct 8, 2021

(quoted from post at 19:37:16 10/08/21)
They're not all the same. The studs for the original hubs had sort of a round head with a side cut off that fit in against the hub so it doesn't spin. There was a replacement hub at some point that used studs with sort of a taper and ribs or something that would catch and keep the stud from spinning. They're not interchangeable.

On the other hand, if you're talking about going from the center to the rim, it's just a regular carriage bolt, if I'm remembering correctly.

es Sir! I too have always found it hard to find something when I didn't know what I was looking for!

stripped rear lug nuts on my 9N

Ron Tron

Member

grayrider

Well-known Member

Dave BN

Member

warbaby

Well-known Member

JMOR

Well-known Member

Royse

Well-known Member

CKain(MI)

Well-known Member

Ron Tron

Member

OldTractorNoob

Member

JMOR

Well-known Member

Similar threads