Packrat toolbox 334-3

plowhand · Oct 2, 2021

I have a Weatherguard
Packrat tool box the
drawer is getting harder
to pull out I lubed the 2
wide rollers on the bottom
and they spin freely the
top 2 spin freely too.I
dont see any rubbing or
dragging points anyone
have this problem.
Thanks

Ozlander · Oct 2, 2021

(quoted from post at 12:03:25 10/02/21) I have a Weatherguard
Packrat tool box the
drawer is getting harder
to pull out I lubed the 2
wide rollers on the bottom
and they spin freely the
top 2 spin freely too.I
dont see any rubbing or
dragging points anyone
have this problem.
Thanks

Maybe you're getting weaker with your old age. LOL

Janicholson · Oct 2, 2021

Plastic changes size as it ages. My guess is that the roller system is loosing its spacing across the width of the unit's body. If squeesing the body inward makes it easier, then maybe a shim under the rail would work. Jim

DoubleO7 · Oct 2, 2021

You got the rollers spinning ok.
Did you check for wobble?
With weight in drawer maybe one or two have too much wobble and are causing a bind.

Or maybe not take the model name of box so literally, ha.

Packrat toolbox 334-3

plowhand

Member

Ozlander

Well-known Member

Janicholson

Well-known Member

DoubleO7

Well-known Member

Similar threads