John Deere 4440 and 158 loader

Al nickel · Aug 10, 2021

I have just finished moving my 158 loader from my 4010 to my 4440. I think it will be a nice unit for me . However,I can find no where to mount my toolbox. Any ideas??

4520BW · Aug 10, 2021

can you use 2 longer bolts thru the frame ?

Tx Jim · Aug 10, 2021

Back when I owned a 158 FEL I welded 2 nuts 5/8'' to loader mast then bolted bracket to mast. I think there is very limited space for bolting bracket to loader mounting brackets

DeltaRed · Aug 10, 2021

Attach the tool to the mast.May be necessary to weld a bracket of sorts for bolting

Tx Jim · Aug 10, 2021

(quoted from post at 09:59:46 08/10/21) Attach the tool to the mast.May be necessary to weld a bracket of sorts for bolting

Welding bracket directly to loader mast will not allow enough clearance to open toolbox lid without removing tool box from bracket.

centash · Aug 10, 2021

I mounted mine on the back of the tractor....that's where you are headed with tools anyways, to repair that which you are pulling.

Ben

DeltaRed · Aug 10, 2021

True,the factory tool box may not
work,but other boxes may.The lid is the
determining factor.

John Deere 4440 and 158 loader

Al nickel

Member

4520BW

Well-known Member

Tx Jim

Well-known Member

DeltaRed

Well-known Member

Tx Jim

Well-known Member

centash

Well-known Member

DeltaRed

Well-known Member

Similar threads