(800) 853-2651
SHOP NOW

Need help with sickle section ID

T

Tractorcedric

Member
Location
Garland. Utah
So here is what I do know. The rivet holes are 2 on center and are countersunk from the bottom. Needs to be 3 wide and 2 1/2 long. Only identification on it is a O between the rivet holes. I need them for a Gleaner floating cutter bar on my Gleaner F2. The plate on the head says 15 sn F50551. Numbers on the guards are FS-7-52 and 232157. Any help will be appreciated!!
 

Have you tried the nearest AGCO dealer?

I've been amazed many times by the amount obscure parts they can stil supply.
 
(quoted from post at 13:04:53 07/30/21) So here is what I do know. The rivet holes are 2 on center and are countersunk from the bottom. Needs to be 3 wide and 2 1/2 long. Only identification on it is a O between the rivet holes. I need them for a Gleaner floating cutter bar on my Gleaner F2. The plate on the head says 15 sn F50551. Numbers on the guards are FS-7-52 and 232157. Any help will be appreciated!!
Click to expand...
heck with Webb Cutting Components https://www.cuttingcomponents.com/parts/sickle-sections.html.

You will have to call them, as the site doesn't give details on which have countersunk mounting holes. 1-800-578-1480
 
(quoted from post at 08:22:11 07/31/21) Never heard of a section with countersunk rivit holes.
Click to expand...

Case IH haybine twin drive knife where the 2 knives overlap they use a tiny tapered hex head bolt that sits flush in a countersunk hole in the section.

You can buy the sections this way or in a pinch using the right size drill bit make your own chamfer on it.

They drill quite easily.
 
You must log in or register to reply here.

Similar threads

F
sickle section supplier
Replies
6
Views
448
Rick Remmert
R
crsutton81
Farmall sickle mower ID
Replies
3
Views
349
caterpillar guy
C
C
Can someone ID my tractor please. Also a flywheel question.
Replies
6
Views
377
Jim.ME
J
F
Tractor ID Help!
Replies
6
Views
403
FrankDaPlow
F
L
Super C sickle mower
Replies
3
Views
267
Levi81
L
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top