Case JRA-24 Plow 90% Restored

connor9988 · Jul 20, 2021

I posted this down on the Case section but thought some who dont lurk lower in the forum might like to see it too.
I was planning on waiting until later in the week to start putting the plow back together but decided I couldn't wait and went over to the farm to work late on it. I have one more tan Case decal coming for
the backbone (the one on there is a magnet). I don't know if I will have enough time to get the wheel repainted before the MIAPA show but if not I think it will clean up alright for that. The eagle on the
toolbox is also a magnet that I put on for fun.

37 chief · Jul 20, 2021

Nice job. Looks like a heavy duty one. Stan

Bob Bancroft · Jul 21, 2021

Is that for real? Or did you cut it down? I was not aware anyone ever made a 2 bottom semi mounted plow.

Hoofer B · Jul 21, 2021

Very Nice. Is it for Sale????

Tgrasher · Jul 21, 2021

Having redone a plow myself, I have a feel as to how much work you have put in this. I would be proud to have it hooked behind one of my tractors.

connor9988 · Jul 21, 2021

Thank you. Sorry, but I get to play with it for a good long time before it gets sold!

It is a cutdown plow. It WAS a JRA-44 (a 4 bottom with 14 spacing and shear bolt trips)

There aren't too many semi-mount plows that you can easily bring down to a 2 bottom out there but there are some.

DoubleR · Jul 21, 2021

I've only seen a few 3 bottom semi mounted but can't remember ever seeing a 2 bottom. Must be a shop built but is still pretty neat. It will definitely draw attention at the show.

Case JRA-24 Plow 90% Restored

connor9988

Well-known Member

37 chief

Well-known Member

Bob Bancroft

Well-known Member

Hoofer B

Well-known Member

Tgrasher

Well-known Member

connor9988

Well-known Member

DoubleR

Well-known Member

Similar threads