International 350U 3pt

jtnaughton · Jul 18, 2021

I am looking for a International part number 521202R1 which is a bracket for a 3 point hitch center link. Any help would be apprecated.

Janicholson · Jul 18, 2021

I made one for My 350U from two connecting rods that clamped over the round bar of the rock shaft. I cut them off and welded plates to make the
bracket. Jim

Duner Wi · Jul 18, 2021

Do you remember what the rods were from, please? I would like to make bracket too
for my 350U.

old · Jul 18, 2021

I made one for a 300U by taking a piece of flat stock and bending it into a U and then using a bolt to hold it in place for the center link to hook to

DeltaSteve · Jul 19, 2021

Jt,look up 3 point hitches right here on YT. You will find the hitch you are looking for pictured.Easy to make something up from that
pic.Old's idea of bending a strap around the rockshaft is a common fix.

Janicholson · Jul 19, 2021

I found them at a junk yard, they were sized by a ruler to be just bigger than the rock shaft dia. without the inserts. (which I am 750 miles from) I used a sheet of various gauge steel to make inserts to make a zero clearance fit. When tightened there was a few thousandths of space at the rod to cap junction. The last shim was only i/3 length and about .002 thick placed in the middle of both the cap and rod so the pressure would be equal around. Jim

MARK ROBKE · Jul 19, 2021

I think he wants the bracket that bolts to the housing above the PTO and is held on with 3 5/8 bolts. I would
check with a tractor scrapyard. Mark.

jtnaughton · Jul 19, 2021

Mark-

you are correct! I am looking for the bracket that is held on with the 3 - 5/8 bolts.

It is item #6 in the attached link.
521202R1 Pivot Bracket

DeltaRed · Jul 19, 2021

#6 Just make something similar from 1/2onvh steel.BTDT

MARK ROBKE · Jul 19, 2021

I had forgotten, but I did make one for our 340u copying the one from our 300u way back in the '70s. I used 1/2 flat steel, I think. But it did work.
This the correct top link hook up point for 3pt adapters. The rotating rockshaft top link point is ONLY for certain 300u SPECIFIC implements, such as the uf-20 plow or the uf-24 sickle mower.(I am not 100% sure on the mower#, but I am on the plow#!) I still own the 300u my Dad and Uncle bought when I was born, and have put maybe 4000 of the 7800hrs it has on it. Mark.

MARK ROBKE · Jul 19, 2021

Bate Corp. in Indiana is the scrap yard I would try. Mark.

Traditional Farmer · Jul 20, 2021

Do you know if a 340 or a 2444 bracket would be the same? I have both of those.

Duner Wi · Jul 20, 2021

Janicholson, thank you for the info. Appreciate it.

International 350U 3pt

jtnaughton

New User

Janicholson

Well-known Member

Duner Wi

Well-known Member

old

Well-known Member

DeltaSteve

Member

Janicholson

Well-known Member

MARK ROBKE

Well-known Member

jtnaughton

New User

DeltaRed

Well-known Member

MARK ROBKE

Well-known Member

MARK ROBKE

Well-known Member

Traditional Farmer

Well-known Member

Duner Wi

Well-known Member

Similar threads