(800) 853-2651
SHOP NOW

13.9 - 36 tire

L

Lowbuck1010

Member
I started looking for a set of 13.9 - 36 back tires and quickly discovered are like a unicorn. Any that I did find were priced in the vicinity of 1k each. Is this reality or is there something I'm missing? I can't believe there so few manufactures that offer this size. HELP!
 
Looks like NTS Tire has several choices, two for less than
$500 each. They are 13.6-36 tho. I have heard of 13.9 but I
think it's an old size that's been replaced by 13.6.
 
No such thing as a 13.9 x 36. The 13.6 x 36 wasn't a common size, only used on a couple of tractor models 60 years ago.

BUT, if you google, there are several listings for 13.6x36 tires at much less than $1000 per tire. $1120 for two tires, WITH tubes, shipped to your door. That's not bad for an odd size tire.
 
.
cvphoto91106.png
 
my 504 has 13.9x36 tires. (tractor on the right. I don't use the 504 much.) They were on it when I bought it.
cvphoto91101.jpg


My 340 had poor 13.6x36 tires on it when I bought it. I found an almost new set of 13.6x36 tires on good power adjust rims on CL from a junked Case
630. Anyone need the rims? Jon?

cvphoto91103.jpg



cvphoto91104.jpg
 
I purchased one for my Case 630 from Old Dominion Tire in Richmond VA for about $450 to $500 a few years ago. Talked to their guy at Field Days of the Past and he said he
would give me a price. The only problem is each year now they make these things heavier and heavier, use to be easy to move them around.
 
I have them on my 520 and 530 john deere, and also on my farmall 340. As I understand they were the same
profile as the 15-5s. The 13-6s are the same profile as the 14s and the 16.9s. so I've been told by the old
tire guys. they were a shorter diameter then the 13-6s but a hair wider tread allowing less torque, so a
little more pull. so they could sell these smaller tractors as three plow instead of two plow. just my two
cents. john
 
(quoted from post at 05:10:17 06/08/21) .
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto91106.png>
Click to expand...

Huh, must be an old obsolete size. I've never heard of it. Usually when folks say 13.9 they're getting their 13.6 and 14.9's crossed up.
 
The 340 I have I took a set of centers from an H and made them fit the 340 so I could put 13.6X38s on it since I had the tires etc. on hand
 
You must log in or register to reply here.

Similar threads

Goose
Tool Prices....
2 3
Replies
59
Views
3K
jwal10
J
J
MF50 injector lines
Replies
4
Views
200
hymie2lt
H
T
1936 BR clutch
Replies
7
Views
294
treeman53
T
M
1976 Ford 335 questions/problems
Replies
10
Views
315
mhth0727
M
tomstractorsandtoys
Hauling head aches
Replies
19
Views
2K
oldwrencher
O
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top