(800) 853-2651
SHOP NOW

Ford Jubilee 3 pt hydraulics

J

jpalm

Member
Hi fellas, I'm wondering if there is some sort of lift arm adjustments? When I lift a 2 bottom plow, disc, etc., with my Jubilee my 3 point only lifts the equipment about 75% as high as my 8N does. Is this normal these tractors?

Is there some sort for adjustment screw I need to move/out to increase the lift range of my Jubilee?

Any help would sure be appreciated.
 
(quoted from post at 09:23:38 06/03/21) Hi fellas, I'm wondering if there is some sort of lift arm adjustments? When I lift a 2 bottom plow, disc, etc., with my Jubilee my 3 point only lifts the equipment about 75% as high as my 8N does. Is this normal these tractors?

Is there some sort for adjustment screw I need to move/out to increase the lift range of my Jubilee?

Any help would sure be appreciated.
Click to expand...
oes it have the same amount of lift height in Draft mode as it does in Position mode?
 
Your cam follower pin is probably worn. Correcting the situation involves pulling the lift cover, replacing the pin, then going through the adjustment procedure. The adjustment procedure in the Ford service manual uses Nuday special tools/gauges but an alternative procedure is given in the I&T (third party abbreviated) manual. There's plenty of info about the cam follower pin in the YT archives, try searching.
 
Thanks for the help fellas ... I will give all of these ideas a try. Hopefully it's something that's easy to get to. I know it has enough fluid. I luv this O'l girl ... she runs like a champ and has been very faithful.
 

cvphoto90646.jpg
 
You must log in or register to reply here.

Similar threads

K
Ford 800/900 Hydraulic Remote - Auxiliary Port
Replies
8
Views
627
KJMClark
K
stevieb49829
Help on 3 point hydraulics
Replies
2
Views
225
stevieb49829
stevieb49829
stevieb49829
Help on 3 point hydraulics (an update)
Replies
10
Views
262
stevieb49829
stevieb49829
S
Massey 150 3 pt problem
Replies
2
Views
269
Spencer2598
S
T
Independent Float on 3 Point
Replies
15
Views
468
r.w.b.
R
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top