i bought ford 5610 with loader on it the previous had a bungy cord on the remote holding it on. i bought it at an auction 13 miles from home while driving it home i think that the hydraulic may have heated up . when i got home the 3 point hitch still works fine lifts a load, but the remote will not work. i connected the loader to another tractor and it operated fine hooked to it. what do you think may be wrong with the remote?
- Thread starter russell2
- Start date
If it has a second remote, dead head that
while trying to work the loader. If it
works then there is a bad shuttle check in
the remote feeding the loader. If it only
has one remote open the pilot line from the
remote and activate the valve and see if it
makes flow from the valve. If nothing then
it's probably the unload/relief valve in
the priority pack on top of the lift cover.
If there is flow from the pilot/load sense
line then possibly the shuttle valve is at
fault...
More often than not it's the relief acting
up and needs to be disassembled and
cleaned.
Rod
while trying to work the loader. If it
works then there is a bad shuttle check in
the remote feeding the loader. If it only
has one remote open the pilot line from the
remote and activate the valve and see if it
makes flow from the valve. If nothing then
it's probably the unload/relief valve in
the priority pack on top of the lift cover.
If there is flow from the pilot/load sense
line then possibly the shuttle valve is at
fault...
More often than not it's the relief acting
up and needs to be disassembled and
cleaned.
Rod
Tx Jim
Well-known Member
- Location
- Coyote Flats, Texas
Rod
Welcome back to this forum after your several yrs of absence. I hope life has treated you well.
Jim
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy