deanwheeler
New User
Decided to change my head gasket in my Farmall H when I found gray oil at oil change time. Think is going pretty smoothly, but I currently have two questions.
1.) The tube the runs from the top of the governor under the thermostat housing and into the head broke. I believe this line is used for venting. Is there any reason I can't fix that by removing the broken section and replacing with a rubber hose? Or do I need to source a replacement part?
2.) Once the tractor is running again and I go to re-torque the head bolts, do I have to remove the valve train to torque the two bolts hiding underneath it? I'm hoping someone has a trick to torque those two without removing the valve train.
1.) The tube the runs from the top of the governor under the thermostat housing and into the head broke. I believe this line is used for venting. Is there any reason I can't fix that by removing the broken section and replacing with a rubber hose? Or do I need to source a replacement part?
2.) Once the tractor is running again and I go to re-torque the head bolts, do I have to remove the valve train to torque the two bolts hiding underneath it? I'm hoping someone has a trick to torque those two without removing the valve train.