(800) 853-2651
SHOP NOW

International 314 plow

S

SVcummins

Well-known Member
Is back to a 314 instead of a 214 had a friend come over help hang the last two bottoms . The front left bottom is still not right I have another shank Im going to try and see what happens if not I think the frog must be bent
cvphoto87091.jpg


cvphoto87092.jpg


cvphoto87093.jpg


cvphoto87094.jpg
 

I think I see what you're saying. The front bottom looks to be at the wrong angle somehow. Like twisted or something.
I have a 214 I just converted back to fasthitch this year. I finished plowing but its rained so much since then I cant get back into the field.
 
I cant tell much from the pic. but,I trust you know those are adjustable bottoms?There is a special bolt that holds the frog to the beam. It has a rectangular head with an excentric under. It is the bolt closest to the beam pivot.I'm short on Super Chief bottoms,but may have some extra (spring trip) beams/standardsI have probably 10 (or more) of rigid beams and standards for both sides. I could sell a couple for parts.I have figured out a way to 'straighten' a bent beam. It involves cutting the beam at the bend and bolting it solid to a beam of the oppisite side. Welded with 7018,they work out well.I can telll you more later.Hever heard of a bent frog. Call me. Both of you have my number.I've been running those IH plows(314;642...) for 40 years. I have a few parts(plows)on hand.
 
I put the arrow in the same position on all bottoms . The special bolt is now replaced with a washer that fits on the bolt and you turn it to the position you want
 
I may be able to shim it . Ive done that before with the other
shank it worked until I got into some really bad rocks and I
bent the shank almost straight instead of curved
 
Well it looks like a plow again had to shim the left hand moldboard to get it inline with the other bottoms . Ill have to do some more looking I guess . I know the main frame isnt bent but the Im beginning to think maybe piece that bolts to the main frame is bent or the frog .
cvphoto87335.jpg


cvphoto87336.jpg


cvphoto87337.jpg


cvphoto87338.jpg


cvphoto87339.jpg
 
You must log in or register to reply here.

Similar threads

B
IH Fast Hitch Plow and Disc ID
Replies
7
Views
850
Kevin Happke
K
bwillett
Miami Valley Steam Threshers Association Plow Day 2023
Replies
1
Views
127
bwillett
bwillett
B
International A left Rear Wheel
Replies
12
Views
438
504
5
R
JD 4630 hydraulic problems
Replies
14
Views
594
rolsen05
R
B
Old International commercial truck R185
Replies
12
Views
519
Sprint 6
S
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top