Case 1845c, slow acting

JL2510

Member
We have an 1845 Case skid loader. The valve body was leaking bad, so I took it apart and replaced all the orings and seals that I could get. No leaks now, and everything works as it should EXCEPT the lift arms are very slow to lower. They raise fine, and all other controls work fine.

Anyone in here have experience with these? I'm wondering if I have a seal or oring messed up or if its just something simple like air in the lines?
 
Sounds like something is stopping the spool from traveling the full distance.

Return spring, spacer, washer, handle linkage, something assembled wrong...
 
Check to make sure the your auxiliary foot pedal is in the center position and not rocked to one side or the other we get these machines in a lot and the pedal is engaged to one side or the other causing slow hydraulics
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top