A few jobs around today

SVcummins · Jan 19, 2021

Got my metric coupling nuts today so I can clean up the wiring on my 3020 starter previously I tried making a standard size nut by tapping it but didn’t work . Also picked up my check valve for my 4020 . Then I went got my bale spinner it needs a new cogswell cog before I can feed. My new front wheels showed up today too

Patsdeere · Jan 19, 2021

Sounds like a late Christmas!

oldsarge · Jan 19, 2021

boy,that sprocket don't owe you anything!!!!!!!!!!!!!!!!!!!

wore out · Jan 19, 2021

(quoted from post at 20:02:01 01/19/21)

Gosh, FOR SURE you have a cog issue!

And likely a stretched/worn out chain issue as well to annihilate the sprocket like that.

Waiting for a report on the elbow/check valve/hydraulic issue, as well!

HOPE it improves things for you!

SVcummins · Jan 19, 2021

These bale feeders are extra tough on sprockets .

SVcummins · Jan 19, 2021

It was an early Christmas I’ve got some seal kits and synthetic gear lube from the dealer too

SVcummins · Jan 19, 2021

I certainly hope it helps as well . Turns out just switching from
the yellow bucket oil helped a lot

JayinNY · Jan 19, 2021

I hope you get you get a stimulus check to help pay for all that, I never got one this time around? The $600 one

tomstractorsandtoys · Jan 19, 2021

Great to be busy. I bet the sprocket was a cheap soft china one. I ran into that on a Deere 507 rotary mower. Had a shop fix me up a new sprocket that only lasted a short time. Second time he ordered a hardened sprocket. Worked fine after that. Tom

wore out · Jan 19, 2021

(quoted from post at 21:53:25 01/19/21) Great to be busy. I bet the sprocket was a cheap soft china one. I ran into that on a Deere 507 rotary mower. Had a shop fix me up a new sprocket that only lasted a short time. Second time he ordered a hardened sprocket. Worked fine after that. Tom

"Second time he ordered a hardened sprocket."

One has to be careful when ordering a "hardened" sprocket.

Nowadays that can get you a compressed powdered metal sprocket that is harder than @#% and wears extremely well but will shatter like glass under a nasty shock load.

SVcummins · Jan 19, 2021

I still haven’t seen the first one . Nobama fined me so hard for not having health care I’m a little bit behind to uncle scam got it cleared up now but the irs isn’t doing anything for a few more weeks .

SVcummins · Jan 19, 2021

I’m afraid a hardened one would shatter in this application

SVcummins · Jan 19, 2021

I have to stay busy or I go clinically insane

JayinNY · Jan 19, 2021

Your topic is locked, gee I hope i didn’t $iss you off?

SVcummins · Jan 19, 2021

Well golly gee guess I just made up the 1700.00$ fine for not having external_link care huh ? I can post the paper if I need to

SVcummins · Jan 20, 2021

Or late I guess

SVcummins · Jan 20, 2021

I am still hoping for the first check . I sent you a picture in your email why

4520BW · Jan 20, 2021

Was the old sprocket made by spacely sprocket?

Hoofer B · Jan 20, 2021

How do you keep your hands so clean?

SVcummins · Jan 20, 2021

Cogswells cog

SVcummins · Jan 20, 2021

May have to call spacley see if they can cross it

SVcummins · Jan 20, 2021

Lots of soap it was the day after church buy friday they won’t be so clean 😂

SVcummins · Jan 20, 2021

Got the new cog and hub today welded it up got it put back together. Bomgaars what you need when you need it . The sprockets won’t run true the bale spike bent but it’s a whole lot better than it was I think it will run for 10 bales it had been running before then we quit feeding round bales

A few jobs around today

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Similar threads