The vertical round chrome looking shaft (maybe 7/16") under the protective rubber boot that pops up and down in the PTO casting when the PTO lever is moved off and on has broken off. The break is flush right at the point when the threads start. As most of you know who work with Farmall's the threads are used to adjust the pressure of the PTO clutch. When looking at the Case IH parts website they identify the part as item #26 on the Farmall 706 two speed PTO page, but they never put item #26 on the list of what the part is called or give an actual part number. Why wouldn't they list the part?? Does anyone know what the part number is for this item? This is the top piece. It is attached to a bottom piece with a tiny little roll pin. I believe this top piece is 5 inches long from the bottom of the threads to where it joins the bottom piece. Thanks.
- Thread starter andy r
- Start date
wore out
Well-known Member
FIAT got "smart" with us and removed references to parts that are no longer available from them last year.
If this link posts, I believe this is what you are looking for, and there's lots of part numbers listed if you want to do some 'net research. (Doesn't list 706 though???)
https://www.waterstractor.com/cart/prod_enlarged.php?ID=p2617&CID=1&SCID=132
Thanks. That is it. Maybe you will see my reply to my first posting. I couldn't find it under Farmall 706, but did find it under Farmall 756. Case IH wants $240 for that part. The one you sent me for a little over $100 is probably aftermarket made by Hy Capacity possibly. Someone today told me Hy Capacity was making them. $105 is much better than $240.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy