I ordered 10 strippers 70$ each from the local fiat-cnh . I need about 15 so I may try to make some to fill in the gaps . I’ve got a lot of work to do on the pickup to get it back into shape hit a big rock last year and bent some or the tine bars I will have to pull them out and straighten them and I may replace the cam followers as well while I’m that far into it . Pretty happy with the baler once I finally got it figured out the local fiat-cnh dealer had two guys work on it and they couldn’t figure out what was wrong with it turned out to be a worn out linkage on the needle safety latch . The bales sure take handling a lot better than round bales these I can just dump and go get another load