rustred
Well-known Member
i took a few pic's of the crusher for those who have never saw one .
one this side view is the burr adjustment. you turn the wheel in or out for depending on fineness of chop. once ready to crush you lift the handle and lock it in and this puts the burrs closer together for grinding.
i rolled out the belt and measured it and its a 120 ft endless x 7 inch.
and found a new set of burrs. when one side gets worn down you turn them around and use the other side then after that they are junk.
i have made a lot of chop with this unit in the 1970's.
one this side view is the burr adjustment. you turn the wheel in or out for depending on fineness of chop. once ready to crush you lift the handle and lock it in and this puts the burrs closer together for grinding.
i rolled out the belt and measured it and its a 120 ft endless x 7 inch.
and found a new set of burrs. when one side gets worn down you turn them around and use the other side then after that they are junk.