Econmobile 620 forklift

rlp in Co. · Nov 17, 2020

Anyone know where I can get a master
cylinder or a kit for this forklift? It has
a inch and a quarter bore.

BRSnKY · Nov 17, 2020

Would take it into closest NAPA and show it to the oldest guy there. Its probably a cylinder for a common vehicle. Just gotta figure out which one. The old guy might recognize it.

Denny K · Nov 17, 2020

Clean it up good and look for stamped numbers. Wagner brake cylinders started with Fxxxx IIRC. Place I worked had a Wagner catalog
and listed the casting #'s and kit # for it.

Denny K · Nov 17, 2020

Site wouldnt accept my post. Ill try again. Clean it up good and look for a casting #. Wagner brake #'s started with F like F12345 IIRC. Where I used to work we sold Wagner and had a catalogue that had the casting #'s listed with the kit #'s. You may be able to google a casting #.

Old560 · Nov 17, 2020

Both of these are inch and a quarter top one is a Napa number bottom one you can cross over to Napa. Don’t know if that really helps.

Old560 · Nov 17, 2020

Sorry that was for wheel cylinder not master cylinder.

Steve@Advance · Nov 17, 2020

2X on the casting number.

That is a way to identify it, regardless what it came on.

I would concentrate on finding a new cylinder instead of a kit.

rlp in Co. · Nov 17, 2020

Thanks, I might need those too, but first I need a master cylinder.

Econmobile 620 forklift

rlp in Co.

Well-known Member

BRSnKY

Member

Denny K

Member

Denny K

Member

Old560

Member

Old560

Member

Steve@Advance

Well-known Member

rlp in Co.

Well-known Member

Similar threads