Getting ready for winter!cheap plow for loader tractor!

Farmer Rock · Oct 19, 2020

I am sure a lot of you fellows have used a setup like this,but I am posting this hoping it will be of some help to somebody in this same spot.
I bought this old 7.5 foot truck plow for $100,to use on my mf203 loader tractor,because my cub 184 that I use for snow plowing finally blew up.
Anyways,this is cheap,simple and very durable.Altogether cost me $160 after the needed steel.3/4 ID steel pipe,3/4 round stock,a shackle,a fee cutter pins,and a heavy T_post which I had already.pictures below(sorry,do not know why my 8n is in there.

Rock

Farmer Rock · Oct 19, 2020

Farmer Rock · Oct 19, 2020

I have no idea what is going on with these pictures.I had all of them on the original post,then nothing appeard,tried it again and just a random picture .let's see if this works.

Rock

Farmer Rock · Oct 19, 2020

47fivewindow · Oct 19, 2020

Good idea. Are you going to try to get the power angle to work?

michford · Oct 19, 2020

You should be able to make a seriously high mountain of snow with that set up lol. Will be curious to know if when using blade at an angle if the leverage of the blade so far out front pushes the back end around on you.

Farmer Rock · Oct 19, 2020

Yes,I plan to get that working soon.The nice part is the plow has manual angle as well,so it can still be used until then.thank you for your interest.

Rock

ramblineagle · Oct 19, 2020

I also use a truck snow plow blade for snow removal, I made brackets and welded them on blade and then remove loader bucket and bolt the blade on the loader arms with a brace mounted and then bolted to the loader frame.

Traditional Farmer · Oct 20, 2020

Pretty small tractor to handle that blade out that far from the front end,a heavy snow and you'll have a heck of a time keeping the front end straight.

caterpillar guy · Oct 20, 2020

Big problem I see is the keeping of the loader frame ends down to a level that will not try to dig in or push loader up when using on unlevel ground.

showcrop · Oct 20, 2020

A lot of guys use pick-up plows on tractors but they mount them in the bucket. Just weld a couple tabs on the floor.

Ken Macfarlane · Oct 20, 2020

May want something/frame to kept your curl cylinders in sync so you don't twist up their eyes with your cross rod.

Getting ready for winter!cheap plow for loader tractor!

Farmer Rock

Member

Farmer Rock

Member

Farmer Rock

Member

Farmer Rock

Member

47fivewindow

Well-known Member

michford

Member

Farmer Rock

Member

ramblineagle

Member

Traditional Farmer

Well-known Member

caterpillar guy

Well-known Member

showcrop

Well-known Member

Ken Macfarlane

Well-known Member

Similar threads