9N rear tires

Ron Tron · Aug 13, 2020

I'm cornfused ..........I have two 9n's a 39 (my work horse) with 11.2-28 inch rear tires and the other one I got a few year back that I'm rebuilding has 13-24 inch tires......I believe it to be a 41.
Those tires are history and I dont want that big of a tire on it when I replace them........Do I have a choice.....? The 11.2-28's are much smaller and more suited to the work I do with them.

cdmn · Aug 13, 2020

The 24 inch tires and wheels were probably borrowed from an industrial model.

old · Aug 13, 2020

On the 9N there was an option of 32 inch or 28 inch. On the Jubilee there was an option of 28 inch or 24 inch. The 24 inch are a lot smaller then the 28 inch ones

miner09 · Aug 13, 2020

The 11.2x28 years ago was a 10x28. Use the 11.2 and it will be same as
when new.

Leroy · Aug 14, 2020

Ewplace but the wheel disk you need to mount the 28" wheel will be more of a problem to find and you might just have to go with new rims but you still need the correct wheel disk to mount the new rims.

Ron Tron · Aug 14, 2020

(quoted from post at 14:27:08 08/13/20) I'm cornfused ..........I have two 9n's a 39 (my work horse) with 11.2-28 inch rear tires and the other one I got a few year back that I'm rebuilding has 13-24 inch tires......I believe it to be a 41.
Those tires are history and I dont want that big of a tire on it when I replace them........Do I have a choice.....? The 11.2-28's are much smaller and more suited to the work I do with them.

Ladies and Gents, Apparently I wasn't clear. I need to replace the 13-24's Does anyone know how wide the rims are on the 13-24 or how to measure the rim's width with the tires still on them?

As well as best supplier recommendations

9N rear tires

Ron Tron

Member

cdmn

Member

old

Well-known Member

miner09

Well-known Member

Leroy

Well-known Member

Ron Tron

Member

Similar threads