Is A Coil Wire Made From The Same Material As A Plug Wire?

KCTractors · Jul 17, 2020

I need a longer coil wire for a electronic conversion I am doing on a Ford 8N with a front mount distributor with a round can coil. I need to make a longer coil wire. Will a 7 MM suppression spark-plug wire work? The wire will need to be 15 to 20"s long.

4play · Jul 17, 2020

They are the same

rew1953 · Jul 18, 2020

s

Make sure to get a good crimp on the ends so they won't pull off and you will be fine.

showcrop · Jul 18, 2020

(quoted from post at 23:33:48 07/17/20) s

Make sure to get a good crimp on the ends so they won't pull off and you will be fine.

Is there a special tool for crimping ends onto ignition cable? I haven't come across that.

timcasbolt · Jul 18, 2020

(quoted from post at 06:44:17 07/18/20)

(quoted from post at 23:33:48 07/17/20) s

Make sure to get a good crimp on the ends so they won't pull off and you will be fine.

Click to expand...

Is there a special tool for crimping ends onto ignition cable? I haven't come across that.

es. You can buy the right tool from any auto parts store, or you can go online and choose that way. I still use the blocks provided with a set of Accel wires. You put one half in a vise and hit the other half with a hammer to create the correct crimp. Have had them at least 20 years or more.

Hobo,NC · Jul 18, 2020

https://forums.yesterdaystractors.c...;postorder=asc&highlight=bobs&start=0

https://forums.yesterdaystractors.com/viewtopic.php?t=1399069&highlight=belden

Is A Coil Wire Made From The Same Material As A Plug Wire?

KCTractors

Member

4play

Well-known Member

rew1953

Member

showcrop

Well-known Member

timcasbolt

Well-known Member

Hobo,NC

Well-known Member

Similar threads