1155 Massey 3 pt lift problems

fourdig

New User
hi all I have a 1155 mf with the 3 pt not moving up or down. I used it to cut some hay until a seal went out of my swather. then hooked the baler up to it and baled for a couple days then my baler broke down. Hired the rest dont and got my swather fixed but when I went to use the 3 pt I had nothing. I opened up both the inspection covers and watched the linkage go through all 3 functions to make sure I could see the servo piston move up and down. I then started up the tractor while watching through the front cover and you can hear hyd pressure up and fluid coming out from the left hand side then it stops. When I shut off tractor you can hear the fluid de pressurized from what it sounds like. Any one have any thoughts i have a manual but its just a copy and is in black and white and can't see any of the pictures very clearly. Thanks for any help
Bart
 
Also I have all other hyd working good remotes,steering,pro, just the lift arms are not working. I think the hyd fluid comes straight from the main pump
 
Bart welcome to YT! You may get a better response if you post this on the YT Massey Ferguson topic section
see the link. The tractor roots of our family farm in KS where I grew up were IH, so that is the ...Used red.. we
also had or I should say my uncle still has a 65 and 1080. I just talked to him recently and he said he was going to try
to resurrect the 1080 for his grandson to use on a chicken/egg farm he is trying to start up. This would include possibly figuring out the hydraulic problem it had which was the reason
we stopped using it. FYI my tractor is a Farmall M we also had to farm with back when, I keep on my mom’s farm back in KS. Good luck!
YT Massey board
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top