Massey Ferguson 204 loader

grandpa Love

Well-known Member
Needing some help. May need to rebuild this hydraulic valve. Leaking badly. What's in there, o rings? Never fooled with one. Any idea on parts supplier?
cvphoto46299.jpg


cvphoto46300.jpg
 
That valve will likely be a Prince or Eaton or some company like that.
The manufacturer's name will usually be cast into the body of the valve.
 
(quoted from post at 16:29:17 06/06/20) It's working. But pouring fluid out the top around the plunger.....? I dunno what its called.

The plunger is a valve spool. There should be a seal in the body around it.

If you go over to the n tractor club site library and look under Implements>Loader, you will see a Davis 99-101-102 Operator's manual and right below it a Davis 101-102 parts manual. The Operator's manual looks like the right base part number but a 2 suffix not the 3 suffix AGCO currently lists on the 690379M3. The parts manual publication number (651027M91) is different Than the publication number 651095M91 for the current parts manual (which does not come up at the AGCO on line parts books) but the valve is similar or the same. Those manuals should help you. Here is the info where you can get to the AGCO on line parts books and AGCO publications. As for parts you can try a Massey Ferguson or AGCO dealer. Massey acquired Davis loaders, and developed them further as their own. I believe you may find the valve is an AICO, and likely no longer in production.

mvphoto56095.png



https://apb.agcocorp.com/
 
o-rings that need replaced. If rusted by the o-ring set spot probably need to replace. Pretty simple to do. Just have it on a clean bench, with no place for parts to wander off to.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top