International 684

MShaw1974 · May 26, 2020

What is the plate under the tractor with 10 or so bolts in it? What does it seal or protect?

Thanks

Farmer Rock · May 26, 2020

Might be an inspection cover.

SVcummins · May 26, 2020

Hydraulic filter ??

used red MN · May 27, 2020

This should help. By the gear train diagrams it is a little difficult to tell which set of gears sets above that plate. It might be the TA if your tractor has one. You get to the other diagrams by clicking...back to the manual...you can view your whole tractors parts sections there. I did select the USA model, but there is also a British built 684. I will recommend viewing the parts page on a PC and not a phone, if you do it on a phone there is a learning curve, or at least this is true fot the iPhone. In particular once you select an individual part to veiw details on when you close that the diagram gets out of whack. You then have to use the slide bar below it to make it smaller and then reposition it and enlarge it by spreading two fingers. It can be frustrating.
USA 684 CaseIH parts page

used red MN · May 27, 2020

MShaw, forgot to add...Welcome to YT!

495man · May 27, 2020

If it's right under the clutch, it's an inspection plate. Takes 9/16 wrench I think. No hard in opening it, I pull the one on a smaller one in that series periodically to check for leaks.

International 684

MShaw1974

New User

Farmer Rock

Member

SVcummins

Well-known Member

used red MN

Well-known Member

used red MN

Well-known Member

495man

Well-known Member

Similar threads