Got the pto

SVcummins · May 24, 2020

Re -sealed and the new seat cushion on had to modify my snap on external snap ring pliers to get the big ring off the old bearing quill I?ve ?adjusted? them lots of times in the 18 years I?ve had them

I wonder if yt will add any mysterious photos to this post

fastfarmall · May 24, 2020

Have you ever seen or used a K-D snap ring plier, The one with a holding ratchet, between the two handles, but looks like you got it under control,with what u got!

matthies · May 24, 2020

So why did you replace the bearing quill, doesn't look bad in the pic? I just had to replace one that had a chunk missing by the internal snap ring groove, have another pto to reseal here shortly for a friend.

SVcummins · May 24, 2020

Yes I have but the last time I looked they didn’t have the kind with flat ends just pins

SVcummins · May 24, 2020

The seal has wore grooves in it

IowaJohn · May 24, 2020

Aren't you uptown? ;-). Looks a heckuva lot easier on a guys patience than using 2 screwdrivers and having to look everywhere for the snap ring. It's always good to replace the guide I've never taken 1 apart yet that isn't grooved.

SVcummins · May 24, 2020

I can usually manage to get em off one way or another but then it usually ruins them especially big ones like this

David G · May 24, 2020

Always enjoy your posts, keep em coming.

SVcummins · May 24, 2020

Thank you

SVcummins · May 25, 2020

Got the pto

SVcummins

Well-known Member

fastfarmall

Well-known Member

matthies

Well-known Member

SVcummins

Well-known Member

SVcummins

Well-known Member

IowaJohn

Member

SVcummins

Well-known Member

David G

Well-known Member

SVcummins

Well-known Member

SVcummins

Well-known Member

Similar threads