windy ridge
Member
hello I am looking at a couple used tractors and wanted to see which would be easier to get parts.oliver 1265 and Minneapolis moline g450.I believe they are both fiats and both loader tractors.Any help is appreciated.
- Thread starter windy ridge
- Start date
Tony in SD
Well-known Member
Not sure about the Oliver 1265 but the Oliver 1365 & MM G450 are the same tractor
Traditional Farmer
Well-known Member
- Location
- Virginia
MM G450 is the same as the Oliver 1365,4 cylinder Fiat,MM 350 is the same as the Oliver 1265,3 cylinder basically the 3 and 4 cylinders are the same except if they are 4WD
the front end on the 3 cylinders are hard to find parts for the front end on the 1365/G450 parts are available.I'd take the 4 cylinder over the 3 cylinder.Also the
4 cylinder MM/Oliver are an 8 speed which is better than the 6 speed in my opinion.
the front end on the 3 cylinders are hard to find parts for the front end on the 1365/G450 parts are available.I'd take the 4 cylinder over the 3 cylinder.Also the
4 cylinder MM/Oliver are an 8 speed which is better than the 6 speed in my opinion.
Both are rated "excellent" in the Import Tractor Guide. Danny somebody compiled it, and he is pretty much considered the expert in Fiat Oliver amd MM tractors.
Import tractors
Import tractors
windy ridge
Member
thanks ended up with the g450
My dad bought a 1365 fiat/oliver maybe
35 years back. We do not farm so this
is a hobby use tractor. When he bought
it , it would jump out of 2nd and 3rd
gear. Mechanics we talked to said that
is not uncommon. We simply got used to
treating it as a 4 speed instead of 8.
Check the transmission on the g450. Otherwise, it has been a good machine
35 years back. We do not farm so this
is a hobby use tractor. When he bought
it , it would jump out of 2nd and 3rd
gear. Mechanics we talked to said that
is not uncommon. We simply got used to
treating it as a 4 speed instead of 8.
Check the transmission on the g450. Otherwise, it has been a good machine
Traditional Farmer
Well-known Member
- Location
- Virginia
I can't see how it would jump out of gear in low range but not jump out of the same gear in high range.6th and 7th gears are the same gears as 2nd and 3rd.
windy ridge
Member
he 450 has a 1510 loader on it.I would like to replace some pins any idea where I can get parts for this loader?
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy