Old plow information

Try photos again
cvphoto3134.jpg


cvphoto3135.jpg
 
When you take a photo to post here try holding your phone sideways.
I don't know who made the plow. If I had to guess I would say it's for an AC B or C.
 
I vote for Farmall A or C. if it is McCormick, there should be "PO xxxx" cast into the topside of the arch over the moldboard.
 
Boy that looks identical to the plow on my super A.

Like others said, the drawbar is turned around to point forward and on the front set of studs on the final drives. And the geometry between the plate hitch and springs is off a little. I thought mine was bent until several people told me it was when the plow was used in connection with its left hand counter part. When in the ground, the plow drafted straight but when lifted out of the ground, the slight offset of springs pulled the plow over a little to give clearance for the other plow. Beautiful pulling plow, KA series bottom if I remember correctly.
. My dad put moldboard extension and Lanz colter on it before I started plowing neighbors gardens.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top