Farmall c was sputtering

Geo-TH,In

Well-known Member
Use these 2
cvphoto1944.jpg

Mower down south. Farmall would run fine for
cvphoto1945.jpg

About 5 minute then sputter. Sputter would go away at an idle.
This is the third time this has happened.
First time the Jubilee. Second time terramite. And now Farmall.

I do my very best to keep fuel clean.
Use metal funnel with screen.
I made a filter for mule using an 1.25 brass drain pipe. Just fits perfectly.


cvphoto1947.jpg


This is a pic of terramite after I bought it from a DIY rental place. So I don't get credit for this. It's odd this 90 choked and no screen.
cvphoto1948.jpg

George
 
I always thought they played well together. JD is trim mower. Farmall does the rest.
Both mowers have a Cadillac ride.
geo.
 
George, I have found rusty dirt in elbows more than any place else in clogged fuel systems. Must be turbulence thing when fuel goes thru the *90 fitting. Mark.
 
george, pretty obvious to me whats going on. you have a shed gnome infestation. little buggers hide dirt and rust everywhere. i think rural king has traps for shed gnomes. they also hide tools on you too.
 
Mark,
When it comes to plumbing and 90s. Building inspector wants 2 45 and not a 90 on horizontal 90s.
Go figure. I always thought that was crazy but maybe there's something to it.
Because this has happened twice before it was the first thing I checked out.

George
 
Gleenster,
Traps my not work in old pole barn, but I'll need to protect my new pole barn. That's where I house my new Kubota, other terramite and Jubilee. Is it possible the gnomes damage the Dana rear and on the other terramite?
I wonder what damaged the limited slip disks.
George
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top