Been shopping around for landscape stone rake and found a dealership selling Titan rakes. Supposedly there made in usa, A frame is 3/8", mainframe is 4"x4"angle,for a 7' they want $600. I've priced around for other brands & there almost twice the price. I have a 800' driveway, so i don't want a cheap unit. Anybody have this unit & are they of quality?
- Thread starter Rkh
- Start date
Geo-TH,In
Well-known Member
I recently bought 48 inch forks from Titan.
Impressed with how well it's made.
I bought a cheapie landscape rake from Rural King. I like using the terramite. I can apply down pressure and go very slow and
Don't have to turn around. My neck doesn't like turning around. Also think a rake is the best way to fine tune gravel driveway.
George
Impressed with how well it's made.
I bought a cheapie landscape rake from Rural King. I like using the terramite. I can apply down pressure and go very slow and
Don't have to turn around. My neck doesn't like turning around. Also think a rake is the best way to fine tune gravel driveway.
George
Hobo,NC
Well-known Member
- Location
- Sanford, NC
That 4"x4"angle will bend rather EZ I like the ones that use flat plate and sandwich the tines in... You will bend tines but not the holder :wink:
All the good ones are made this way yes it cost..
https://www.woodsequipment.eu/landscape-rakes
https://www.i-newholland.com/new-products/farm-king/landscaping-equipment/Landscape-Rake/6030
Another one cheaper I like the way they did the tine retainers.
https://www.external_link.com/tsc/product/countyline-yard-landscape-rake-6-ft
The only good I have see from the cheap ones that use 4"x4"angle is they bend back EZ :shock:
Hobo,NC
Well-known Member
- Location
- Sanford, NC
That 4"x4"angle will bend rather EZ I like the ones that use flat plate and sandwich the tines in... You will bend tines but not the holder :wink:
All the good ones are made this way yes it cost..
https://www.woodsequipment.eu/landscape-rakes
https://www.i-newholland.com/new-products/farm-king/landscaping-equipment/Landscape-Rake/6030
Another one cheaper I like the way they did the tine retainers.
https://www.external_link.com/tsc/product/countyline-yard-landscape-rake-6-ft
The only good I have see from the cheap ones that use 4"x4"angle is they bend back EZ :shock:
Hobo,NC
Well-known Member
- Location
- Sanford, NC
That 4"x4"angle will bend rather EZ I like the ones that use flat plate and sandwich the tines in... You will bend tines but not the holder :wink:
All the good ones are made this way yes it cost..
https://www.woodsequipment.eu/landscape-rakes
https://www.i-newholland.com/new-products/farm-king/landscaping-equipment/Landscape-Rake/6030
Another one cheaper I like the way they did the tine retainers.
https://www.external_link.com/tsc/product/countyline-yard-landscape-rake-6-ft
The only good I have see from the cheap ones that use 4"x4"angle is they bend back EZ :shock:
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy