(800) 853-2651
SHOP NOW

Deisel pump conversion

S

Slim801

New User
Anyone ever done a electirc pump coversion on old ford deisel tractor? Bad umbrella seal im assuming so looking for budget build ideas...
 
If I'm understanding what your saying is, can I use an electric
Pump to bypass or fix my leaking seals.

NO
The seals are in the injection pump, and you need that pump
Regardless how you supply it.
Tom
 
Ok thanks just was curious if i could
delete and block off the original 1958 ford
mechanical pump bypass or upgrade to a
electric pump convetsion maybe?
 
Ok thank you any idea where to purchase umbrella seal or part number or name of the part i need? i called local tractor part store in town and they never heard of a umbrella seal lol. Searching for a 1961 for 801 series 861-d tractor standoyne pump rebuild kit or umbrella seal. Thank you slim.
 
The seal is Stanadyne 10453, but new seals probably won't fix it if the retainer ring is failing inside. Sometimes pumps I repair need a new housing tube also if worn.
 
Call a fuel injector pump shop in your area. Give them the model number off the tag on your pump. They can get you the seals, tell you the right way to remove and install the pump, and possibly loan you the 2 tools to install the seals.
 
No offense meant here, but... considering the questions you are asking, If I were you, I would take the pump off and ship it to Dieseltech.

There are a couple suppliers that sell seal kits for the Roosa Master pumps online.
 
Ok thanks again im gonna attempt to purchase a seal and in house rehad this old tractor. I just dont have the 1k dllrs they want for for rebuild so any redneck hack ideas on how to duct tape zip tie and jb weld ill be good lol.
 
Umbrella seal is on the injection pump shaft, not the lift pump, very few fords used a lift pump anyhow, but you obviously can't replace the injection pump with an electric pump like you could a lift pump. Luckily they aren't too bad to change, seal itself is pretty cheap if you have pump off can do it yourself or have a shop change it.
 
You must log in or register to reply here.

Similar threads

M
Case 1000c fuel injection pump DGVCL 437 roosa master does any one know where to get seal kit or a number for one?
Replies
6
Views
400
used red MN
U
4
4320 injection pump removal
Replies
14
Views
955
grwrench
G
G
Spot to by refurbished parts for 1959 case 310
Replies
14
Views
719
G3rm
G
D
Wheel spacers
Replies
3
Views
292
caterpillar guy
C
crsutton81
Farmall shop day
Replies
10
Views
1K
Hobo,NC
Hobo,NC
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top