ferguson side rake D-EQ-20 model 10704

johnabs · Nov 19, 2019

Just wondering how to replace the drive v belt, and what size does it take. Any manuals that show how to replace the belt
thanks John

Roger Tomfohrde · Nov 19, 2019

If there is a belt on it yet you may be able to find the number right on the belt. You may need chalk to high light it. Never changed one on that model, a manual would be nice to have.

DeltaRed · Nov 19, 2019

You may have to get on the Ferguson forum.If the belt is still there,measure it to get length. Measure width as well as length. If you can find an original OEM part number,JayDee Enterprises can supply the belt.Maybe your MasseyFerguson dealer can find you the OEM part number.

Thomas(AB) · Nov 19, 2019

Couple years ago i asked the same question, and this is the answer i got:

D-EO-20 HAY RAKE NO 8991
Try to measure your old belt just to be safe but it should be 100 7/8" belt. Part number 195433M1 or more commonly known as a C97 belt. I put one on my rake year before last. I found a NOS Goodyear C97 on ebay for $20.00.
Believe there was quite a bit of disassembly required to install it though.

Hope this helps!

ferguson side rake D-EQ-20 model 10704

johnabs

New User

Roger Tomfohrde

Member

DeltaRed

Well-known Member

Thomas(AB)

Member

Similar threads