Searching For

strogers · Aug 31, 2019

In an old post I see you were talking about a JD 36A loader. I have been looking for the control valve cover for my 2010. It is JD part # C14656C I came with the 36A loaders for when you hooked up the remote or independent valve control. The only place to find it is in the 36A manuals. Does anyone have one or know of a lead on where to look for one. I have tried all the usual places that I could think of. Any help would be appreciated.

Jo Bird · Aug 31, 2019

This maybe of some interest to you it's from a similar post back in 2011.
long green line man
02-09-2011 11:49:41
Re: Front End Loader on 1962 Model 2010 R in reply to Jim Z in MN, 02-08-2011 21:54:48
JD loader part cat.[on JD parts.com] PC 683 or PC 870 shows using, oil outlet cover C14656C on tractor valve; or you could drill & tap your regular cover.. Other option, if tractor is above serial# 29000; valve base has 3/8 plugs for pressure & return oil flow, plumbing from plugs in base may a little harder.. check out PC 689.. as far as I know all 2010's are open center ; unless they were changed over later..
Some claim that you can drill and tap your cover, don't if it actually works or not .. or possibly look for a later valve with the 3/8 plugs.

Jo Bird · Aug 31, 2019

PS... I often thought about machining a 1" block to go between the valve base and the case and tapping the supply and return for the loader off that . Not sure if their is enough room for it under the cowl or what modifications to the other controls would be necessary.

Searching For

strogers

New User

Jo Bird

Member

Jo Bird

Member

Similar threads