Case bulldozer

Scott Leiser · Aug 29, 2019

Trying to verify and find parts for a bulldozer I just bought. Believe it's a 1000-c. Made many phone calls and searched hours online and I really need some help. Trying to fix it up and make her nice an reliable again. Thanks in advance for any help. Model no. 7101969

bradley martin · Aug 30, 2019

Post a picture of your machine on the Case board down below and I am sure that you will quickly have an answer to what model you have. It is very difficult to decipher the numbers on your photo of the tag.

Jim.ME · Aug 30, 2019

You might want to contact/join this group. http://www.jicasecollector.com/index.html

Their site serial number list for the 1000C model shows the 1959 year units starting at # 7101201 and 1960 year units starting at # 7101989. By their list, your serial number of 7101969 would make your machine a 1959. They say only 16 units of the 1000C were produced.

Just to clarify the info on the tag you posted the photo of. The model is the top line. Serial number is the lower line. Your serial number tag is stamped, so you could gently clean some of the paint off to get the model number clearer. Use some Scotchbrite type pad, steel wool, or fine emery cloth/sand paper and penetrating oil.

marloweg · Aug 30, 2019

a photo is worth a 1000 words

RedMF40 · Aug 30, 2019

(quoted from post at 20:49:02 08/29/19) Trying to verify and find parts for a bulldozer I just bought. Believe it's a 1000-c. Made many phone calls and searched hours online and I really need some help. Trying to fix it up and make her nice an reliable again. Thanks in advance for any help. Model no. 7101969
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto35002.jpg">

Is there a bulldozer attached to the tag? I won't be much help identifying, just like looking at dozers. Might consider posting a photo of the whole machine. Someone here can help.

Scott Leiser · Aug 30, 2019

I Apologize, never used this site before
and I'm not good at navigating it and
didnt have a picture of the whole machine
lastnight when i posted this. Appreciate
any help. Heres a picture of her. Spoked
back drives. Levers are close to your
track controls not over on the side of
the boxes like some later machines. Has a
4 cylinder continental in it, 4 way
blade, Rounded style fuel tank

db4600 · Aug 30, 2019

Where are you at? If south eastern Mn or western Wi try St. Joseph Equipment. They handled the construction line of Case for many years. Maybe you can get a lead.

Scott Leiser · Aug 30, 2019

Located in wooster ohio, machine was made in Racine ws so I tried calling some random case dealers but didnt have any luck. Too old of a machine. Ill give them a a call. I bought the machine right so I can afford to have parts shipped or take a road trip. Thank you

db4600 · Aug 30, 2019

If north of there try Kugler Salvage in Erhard Mn. 800-877-2130. They deal in Construction salvage.

Case bulldozer

Scott Leiser

New User

bradley martin

Well-known Member

Jim.ME

Well-known Member

marloweg

Well-known Member

RedMF40

Well-known Member

Scott Leiser

New User

db4600

Well-known Member

Scott Leiser

New User

db4600

Well-known Member

Similar threads