Disassembled the big

SVcummins

Well-known Member
Hydraulic cylinders tonight and to my surprise they are the high pressure cylinders . I got these used off another farmhand f11 at the junk yard for 20$ each now to get them resealed and painted
cvphoto33539.png
 
Sounds like you got an unexpected bonus. I'm not a big fan of leaving a loader on the tractor. I barely use it at all since buying a skid loader. Before that though I only put the loader on my 4010 when I needed it then took it back off. I have a JD 48 quick attach loader so it didn't take but a couple minutes. I just don't like having that extra weight bouncing on the front end.
 
I?m going to bury some big timbers so I can pull this one off and put it back on when I really don?t need it on . It?s not quite a quick attach but it?s only 6 bolts and pop the hoses and it?s on or off. I was pretty glad when I found I had the high pressure cylinders
 
Really? I've never even looked at one of those loaders. I just assumed they'd take an hour or more to mess with. Heck mine has four bolts to mount. It's not quick attach by today's standards but not bad. It has the quick attach mounts for the 48 loader.
 
Funny how folks are different. I?ve never had mine off , even though I have a skid steer also. Your front end will no doubt last longer.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top