Carb what does it go to

grandpa Love · Jun 29, 2019

Found this carb for sale , decent price,it's in IN ,so I can't go look at it. Guy says he inherited a bunch of Allis parts but doesn't know anything about them. Any idea what it's off of? Value? Thanks.

Bob · Jun 29, 2019

All you've showed us is the "choke lever side".

Should be a "TSX..." round brass tag opposite the choke lever, or on top.

grandpa Love · Jun 29, 2019

I will see if I can get more pictures..... apparently the parts are 30 miles from sellers house.

gene bender · Jun 29, 2019

it is junk with all that rust probably cant even get screws out to take it apart

old · Jun 29, 2019

To me it looks a lot like a carb off a Farmall B but hard to say for sure with out the numbers off the brass tag

Fritz Maurer · Jun 29, 2019

A-C WD45 maybe...if there were any with choke cables...

Sprint 6 · Jun 30, 2019

I'm in IN, and right now my scrap yard is at $100 a ton for mixed iron. That makes that carb worth 5 cents a pound.

r.w.b. · Jun 30, 2019

Va series case,governor rod against engine blocck,gas line to outside,choke cable to outside air horn to rear.but ive been wrong before

Crazy Horse · Jun 30, 2019

You're kidding about the value part of your question right? At least I hope you are ...... ha!

chcase · Jun 30, 2019

Only a guess but I would say it's a tsx 114 off of a vac case the tag will tell the real story

sotxbill · Jun 30, 2019

def off of a submarine

J.Wondergem · Jun 30, 2019

I agree with Old. With out going to look at mine, it looks like a extra one I picked up for three bucks.

Adirondack case guy · Jun 30, 2019

It is a small body Marvel Schrebler carb. Could have been used on dozens of different engines. The throttle and choke shafts could be inserted from either side to work with what ever engine that they were fitted to.
Loren

unc · Jun 30, 2019

If the brass tag is present, it will help you figure out what it fits. If the tag is missing, it looks like a decent parts carb. Marvel Schebler carbs have great parts interchangeability, and are easy to repair and modify. Around here, complete used carbs like that one go for about ten bucks, really rusty or incomplete, maybe five. I've got a grease pail full of old MS carbs, and a box full of partially used rebuild kits. Haven't been stumped yet. unc

Royse · Jul 2, 2019

Looks like a Marvel TSXU- not exactly like this one though.
U for universal.
Linkages could be put in either way, choke cable holding plate
turns so the cable can come in from the front, top, bottom, etc.
Gas line could be put in from either side.

The one in these pictures now has a Ford throttle rod in it and is
installed on a 1946 MoTowTug forklift with an 8N engine in it.

Carb what does it go to

grandpa Love

Well-known Member

Bob

Well-known Member

grandpa Love

Well-known Member

gene bender

Well-known Member

old

Well-known Member

Fritz Maurer

Well-known Member

Sprint 6

Well-known Member

r.w.b.

Well-known Member

Crazy Horse

Well-known Member

chcase

Member

sotxbill

Well-known Member

J.Wondergem

Well-known Member

Adirondack case guy

Well-known Member

unc

Member

Royse

Well-known Member

Similar threads