old
Well-known Member
- Location
- Camdenton Missouri
So have been talking to a guy for a few days about his tractor and it not running well. Went and looked at it today. He fired it up and I noticed a bit of a popping so pull the plugs out and found #3 was wet with gas. Checked the compression on it and less then 30PSI. So pull the hood and gas tank and checked the valves. All of them where out of spec. So I adjusted them and then check compression again and still low so checked compression on #2 and it too was 30PSI so pulled the head. About an inch of head gasket was gone between to two cylinder so tomorrow I will be putting on a new head gasket.