4230 hydrolic stutter update.

cjunrau

Well-known Member
Thanks for the replies I got.
I changed filter and oil, cleaned suction screen (didn?t know if had one except for the people who told me when first asked questions)
It continued to stutter after all this was done.
I had to use it anyway as my other loader was down completely.
After a few days ( I only feed 1 bale every other day) I had to move 25 bales off the field so I could plant corn. My daughter did this for me while I worked the feild. 2 days later I went to feed and the loader was working fine.
All hydrolics did it not just loader.
Loader is plumber into a block between the tractor and the rear hydraulic outlets.
As far as I know that is how JD is to be plumbed.
I am assuming something was stuck and with my daughter bouncing over the feild or just fresh oil going through it something unstuck and now works great.
Now if only I can figure out why A range and park don?t work.
Thanks again to those who said ?it?s not likely the pump ?
 

Thanks for update. I'm gadto hear hyd's are operating correctly. Problem could have been as simple as hyd filter relief valve was stuck open then became "unstuck" from driving tractor over rough terrain.
 
. Being used on 25 bales would have fully warmed up the entire hydraulic system for the first time in maybe years . This may well have loosened a component or dirt .
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top