Kinze 3000 or KPMII monitor work w/ regular sensors?

andy r · May 13, 2019

Will the Kinze 3000 or the Kinze KPMII planter monitors work with the regular/normal/old seed tube sensors that Dickeyjohn sold for years? I know there is what they call a high population sensor. Didn't know if that was a requirement of the Kinze 3000 or KPMII monitors. I have a Kinze planter harness they would be hooking into. My planter harness to the monitor harness is the round plug type with the little pins. I believe Dickeyjohn used this type as well. I have ran a Kinze/Dickeyjohn 1000 monitor with no problems. The connectors on my sensors are the flat "weather pack" style. Thanks for any information.

TJV · May 14, 2019

I'm pretty sure the sensors are different between dickey john and the Kinze kpm 2 and kpm 3 these use the sensor with the special blue weather pack connector I think the harness is completely different too. The 3000 monitor is made by dickey john and will use the same harness and sensor as the 1000 but not the kpm monitors. I have both the 3000 on the older planter and the kpm2 on the newer planter and I'm almost positive the two systems won't interchange.

Kinze 3000 or KPMII monitor work w/ regular sensors?

andy r

Member

TJV

Member

Similar threads