(800) 853-2651
SHOP NOW

B414 loader.

D

Dorfi2

Member
y 414 has an int 1550 loader on it so how many lbs should this loader lift..I know it does not seem very strong,,THNKS
 
We had that tractor and loader on the farm for many years, did a lot of work cleaning barns, moving materials, even broke the front wheel spindles several times on the tractor as it would lift a lot. My brother even used it to excavate for his house foundation?took him all summer.
 
Hi, 1550 had double acting cylinders(up and down pressure), 1501 had single acting cylinders(up pressure only) both had single bucket cylinder. We had both loaders, 1501 on IH 434 and 1550 on IH 384. Both loaders would lift enough to lift the rear wheels off the ground even though the rear tires were calcium filled. If we were loading something heavy, we would put the back blade on the 3pt for added weight. Never broke a front spindle but changed many front wheel bearings.

JimB
 
Yes single on the bucket This loader will not lift anywhere near what you guys tell me..What do I look for..
 
Sorry but made a bad mistake on my description..The loader is a 1501 and has uplift only no down pressure...Again sorry
 
The 1501 was basically a manure loader, not real heavy duty. A better choice for general use would be the 2000, But I have never seen one on a 414. You would have to ask around to make sure it would fit. You would also have to do something to the valve so you can have down pressure on the boom.
 
(quoted from post at 15:33:26 05/08/19) Sorry but made a bad mistake on my description..The loader is a 1501 and has uplift only no down pressure...Again sorry
Click to expand...

Might be how it is plumbed and if you have the valves right.

Only 1501 I ran used the 3pt lever to raise the boom and you had to have the valve under the seat set right so full flow went to loader. Trip bucket so only single acting cyls
 
You must log in or register to reply here.

Similar threads

B
Farmhand F258
Replies
5
Views
318
brent!
B
Mike440i
440i with 71 loader and pippen backhoe
Replies
6
Views
345
Mike440i
Mike440i
super99
Oliver loader
Replies
7
Views
299
super99
super99
P
International 2500B loader backhoe
Replies
4
Views
291
PineRiverPat
P
B
Crank Driven Hydraulic Pump Oil
Replies
3
Views
565
Bill VA
B
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top